How to Videos | Highside Chemicals, Inc.

HVAC/R Instant Repair Kit

Leak Lock® Advanced Specialty Sealant

Leak Lock® Advanced Specialty Sealant seals small imperfections in various refrigerants and refrigeration lubricant systems, preventing leaks and sealing over 1500 psi of pressure on compression and flare fittings. It doesn’t dry, cleans up easily, and is applicable to many surface types. It’s compatible with all refrigerants and refrigeration lubricants and does not contaminate systems. It’s resistant to temperature or pressure spikes and equipment vibrations.

Leak Lock® Pipe Joint Sealant

Leak Lock® is a thread sealant that prevents leaking of nearly all fluids, chemicals, oils, gases and refrigerants. It’s suitable as a gasket sealing compound and can also prevent loosening of nuts, bolts, plugs, fittings, and other parts. As a sealant paste, it stays flexible after cured, adheres to surfaces, fills voids, and is potable water safe once cured. It works in temperatures from -200°F (-93°C) to 400°F (204°C), as well as full vacuums and pressures to 10,000 psi.

HVAC Super Pro™ Instructional Video

Highside Chemicals Leak Lock Multi-A solution for all HVAC new installations and installation repairs calling for solderless bonding, the HVAC SuperPro® is compatible with all refrigerants and oils and bonds copper, aluminum, and brass in any combination. It requires no mixing and is designed to work with standard ASE fittings..

Red Epoxy

This versatile product fills and seals cracks and holes in a wide array of rigid materials, including metals and robust plastics. It offers exceptional chemical resistance, successfully sealing various refrigerants, lubricants, fuels, gases, and solvents. It has been pressure tested to over 3000 psi and an operating temperature of up to 350°F.

Leak Lock One-Step PVC Cement

Highside Chemicals Leak Lock Multi-Purpose One-Step PVC Cement required no primer. Fast Setting. Suitable for All Weather Conditions. Great for flexible PVC pipe. Rated for pressure testing up to 300 PSI. Low VOC. Up to 120 degrees F. Sets in 20 seconds.

JFC Aluminum/Copper Solderless Bonding

Just For Copper works well for Copper and Aluminum solderless bonding. Starts to set up in 20 seconds and forms a solid bond in 20 minutes. Use on all rigid copper pipe and aluminum pipe and tubing without fire, or any size pipe used as a drain or in low pressure applications. Tested to 1200 PSI. Non-toxic, non-flammable, non-conductive and non-irritant. Temperature range from -40°C to 118°C (-40°F to 245°F). Bonding with no fire.

Just for Copper Epoxy Putty

HVAC/R Instant Repair is part of the Highside Chemicals – Just For Copper – EPOXY PUTTY – Product Demo. This is a two-part epoxy that can be used in the presence of water. It is a permanent fix when used on lines, condensate pans, and coils in HVAC/R Systems. Also great for Plumbing and will repair just about anything.

R3 AC Leak Repair

HVAC/R Instant Repair is part of the Highside Chemical’s R3 – Leak Stop, Lubricator and Conditioner for AC/Refrigeration Systems R3 – Repair – Restore – Reveal. For AC and Refrigeration Systems. It’s an All-In-One treatment with UV Dye to locate larger leaks. Seal Existing Leaks in Condensers, Evaporators, Hoses, Gaskets, and O-rings. Renews O-Ring and Seal Elasticity. Lubricate moving metal parts. Prevents future leaks. In general, R3 is designed to seal an AC system that has slow leaks losing refrigerant over time. Maximum leak size approximately 0.50 mm. The system must be able to hold a vacuum on the low side for 15 minutes, at a minimum. For systems 1 to 6 tons. It’s polymer-free and tested to be non-clogging to the AC compressor and recovery equipment. It’s a Permanent Fix. For more information go to www.highsidechem.com

Plumbing Instant Patch – Aluminum Repair

Plumbing Instant Patch is the perfect way to quickly and permanently fix a plumbing problem in Aluminum.

Plumbing Instant Patch

Instantly make repairs on copper tubing and lines. Plumbing Instant Patch is a two part, three step process that will permanently repair holes and cracks in copper. Also works on anything ridgid including aluminum, pvc and galvanized pipe.

Heat Shield Gel

Heat Shield Gel – all-temperature barrier spray prevents heat damage to nearby components during soldering, brazing, or welding. Its unique no-drip formula sprays on as a gel and evaporates within 24 to 48 hours without staining. For use on all surfaces including but not limited to wood, insulation, valves, piping, and drywall.

Highside Chemicals Acid Test Kit / Acid Neutralizer

Highside Chemicals Acid Test Kit and Acid Neutralizer Product Demo. How to tell if your HVAC System has a high acid level and steps to neutralize the problem.

Older Videos

HVAC Super Pro – Espanol

Just For Copper – Lifetime Solderless Bonding

Just For Copper is for Copper and Brass solderless bonding. Starts to set up in 20 seconds and forms a solid bond in 20 minutes. Use on all rigid copper pipe up to 2.5 inches @500psi, or any size copper pipe used as a drain or in low-pressure applications. Tested to 1200PSI. Non-toxic, non-flammable, non-conductive, and non-irritant. Safe for potable water. Temperature range from -40°C to 118°C (-40°F to 245°F)