Trace 2® Pro Tech Service Kit

Trace 2 ProTech
2 oz Injector Kit Item #21002 – 6 per Case
(2) 2 oz Injector Refill Item #21022 – 6 per Case

Trace Light 
UV Trace Light w/ Strap Blister Pack Item #76006 – 12 per Case

This leak detection kit contains a bottle of Trace 2® and an injector hose to service AC, refrigeration and hydraulic systems. Trace 2® features a vibrant red dye that when exposed to UV light, transforms into a bright purple-blue color, ensuring easy leak tracing without interrupting system operations. Trace 2® is designed to be universally compatible with all refrigerants and refrigeration lubricants.

Trace 2® features a vibrant red dye that when exposed to UV light, transforms into a bright purple-blue color, ensuring easy leak tracing without interrupting system operations. Neither will leave any residue or deposit in the systems. Notably, they work well in detecting intermittent leaks, as the red color and fluorescent tracer stays on equipment until wiped off. View Trace® and Trace 2® for more information.

The Trace 2® Pro Tech Service Kit is safer than a Halide touch and will never give you a false positive. It works on all leaks and leak types—even leaks due to metal porosity. It also works in all weather conditions, including wet and humid conditions.

Kit Contains:

(1) 2 Ounce Plastic Injector pre-filled with Trace2
(1) Set of Instructions for application.
(1) 12-inch Quick Service Charging Hose with Control Valve.
(2) 1/4 Inch SAE Service Valve Caps

SKU: trace2-pro-tech-service-kit Categories: ,

Description

This leak detection kit contains a bottle of Trace 2® and an injector hose to find leaks in AC, refrigeration and hydraulic systems.

Applications

Trace 2® is designed to trace leaks in all AC, refrigerants, and hydraulic systems.

How to Use

Note: 2 ounces of Trace2® for every 6 tons of refrigeration or 5-7% of system’s oil volume.

Refrigerant Used as a High-Pressure Source:

Prep: Remove cap from top of the injector and tighten cap on opposite (bottom) end to provide leak proof seal.

Connect: Using a charging hose, connect the top of the System Injector to a source of refrigerant. Tighten hose fittings to make seal.

Rotate: Turn the System Injector upside down so the bottom is now in the up position and the liquid is in the top of the Injector. Remove the second cap. Using the supplied Highside Pro Tech Service Charging Hose, connect this end of the Injector to access valve on low pressure side of compressor.

Purge: Purge lines and when lines are purged, tighten fitting to make seal at access valve.

Insert: Insert the System Injector so that the liquid is now in the bottom of the injector and refrigerant enters from refrigerant source at the top of the Injector. Open valve at refrigerant container to apply pressure to system.

Charge: With system running, very slowly crack (access valve) Pro Tech Charging Hose Valve and charge liquid into system. Caution: You are charging a liquid. You must charge slowly so that liquid does not slug the compressor.

Finish: When liquid is all charged, close refrigerant valve at refrigerant container and Pro Tech Charge Hose Valve at compressor. Dissemble hoses.

Equipment Used as High-Pressure Source:

Remove: Remove threaded cap and attach supplied Pro Tech Service Charging Hose.

Connect: Connect the Injector as shown in the manifold gauge diagram and purge the lines. Open valve on Pro Tech Service Charging Hose.

Open: Open the valves on the manifold gauge very slowly and let the pressure from high side push the liquid into the low side of the system.

Safety

Product PDF

Product PDF

Reviews

There are no reviews yet.

Be the first to review “Trace 2® Pro Tech Service Kit”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Related products