Description
Orange Pan Potion™™ is a permanent resurfacing kit for ALL metals or rigid plastics. It can be used during installations or repairs.
Applications
Preventative: Apply during new installations to extend the life of your equipment. Put a STOP to damage and corrosion by preventing future water damage.
Repair leaking drain pans without replacing equipment or, in some instances, entire units.
How to Use
- Turn off all power to the system.
- Remove the panel of the air handler revealing the drain pan, and remove the drain pan.
- Clear the drain pan of debris, oils, etc., revealing a clean, dry surface.
- Cover any penetrating holes or cracks with duct tape on the external side of the pan for temporary support & plug up the drain pipe opening before application.
- Pour Part A(Red Resin)bottle into Part B(Yellow Hardener) bottle, screw the cap back onto the bottle, and begin shaking. Shake the product thoroughly until the contents have reached a consistent “orange” color.
Once thoroughly mixed, pour out ENTIRE contents into the pan. Some residual will remain.
DO NOT LEAVE EXCESSIVE AMOUNT OF PRODUCT IN BOTTLE
**Tip: Product is self-leveling. However, for a quicker, full coverage application, sit the pan vertically or move the pan around until desired results are achieved.
Allow the product to cure for approximately 1 hour, depending on temperature and humidity.
•Note: Make sure to follow instructions, failure to thoroughly mix product, can result in an improper application.
Reviews
There are no reviews yet.