Highside Chemicals
Supco
   
 
 
     
Jet Foamer

HD JET FOAMER

How to Use Video
Highside Chemical
11114 Reichhold Road - Gulfport, Mississippi 39503, USA

800-359-5599
228-896-9220
Fax: 228-896-9544

Email

 

HD Jet Foamer

HEAVY DUTY ALKALINE BASED FOAMING COIL CLEANSER

  • HEAVY DUTY CLEANING POWER
  • SELF-RINSING ON EVAPORATOR COILS
  • CONTAINS NO OZONE DEPLETERS
  • PLEASANT FRAGANCE
  • HIGH FOAMING PENETRATING SPRAY
  • ENVIRONMENTALLY FRIENDLY
  • WATER-BASED - NONFLAMMABLE
  • NO CHLORINATED SOLVENTS

HD JET FOAMER – Alkaline based aerosol coil cleaner
Item #59520: Each unit contains 19 ounces aerosol coil cleaner.
12 units per case. Case weight = 15.0 pounds.

DESCRIPTION: HD JET FOAMER is a high performance, heavy-duty foam detergent coil cleaner in the convenience of an aerosol. It is especially suited for use on most any coils such as window air conditioners, roof top AC units, auto radiators, small air cooled equipment, small condenser and evaporator coils, metal filters, fan blades, and more. Nonflammable and water based, HD JET FOAMER no chlorinated solvents or ozone depleters. Jet Foamer is equipped with a special 360-degree jet valve that can be sprayed in any position while the blasting stream easily reaches into tight areas. The aggressive alkaline blend quickly and easily liquefies dirt, grease, oil or other residue and deposits. Fortified with corrosion inhibitors to prevent metal degradation. Will not harm drain pans, plastic, or other materials in and around AC equipment. Clinging foam is completely self-rinsing on condensate producing coils.

DIRECTIONS: Turn off or disconnect power to equipment being serviced. Shake well. Remove cap and point toward surface to be cleaned. Thoroughly saturate the targeted area with HD JET FOAMER. Be sure foam evenly covers the entire surface. With this self-rinsing formula, the foam will break and condensation will completely rinse the emulsified material. Surfaces may be wiped clean or rinsed with water if desired or if using on non-condensation producing coils. Brush if needed. For extremely stubborn or heavy deposits, repeat applications may be necessary. Turn on or return power to the equipment.

SAFETY CONSIDERATIONS: HD JET FOAMER contains sodium metasilicate. Eye irritant. Avoid contact with eyes. In case of contact, flush immediately with water. If irritation persists, get medical attention. Avoid prolonged or repeated skin contact. Avoid excessive inhalation. Use with adequate ventilation. Avoid spraying on food or food contact surfaces. If sprayed on food contact surfaces, flush with water before using. Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120°F. Keep out of reach of children.
CAS NUMBERS: Water 7732-18-5; Propylene Glycol Propyl Ether 1569-01-3; Sodium Metasilicate 6834-92-0; Isobutane/Propane Blend 75-28-5/74-98-6
USDA Category: C1
Classification: Aerosol Coil Cleaner
General Appearance: Foamy Spray
Color: White
Odor: Lemon pH: 13
Vapor Pressure @ 70°F: Max. 60psig
Spray Pattern: Wide Oval
Flammability: Not flammable per CPSC Flame Projection Test
NFPA Code 30B: Level 1

 

 


 

HOME
SDS - MSDS LINKS
HOW TO USE PRODUCT VIDEOS
 
 
CONTACT US