Highest Quality Chemical Products
Product Image
Coil Blaster
Product SDS
Product PDF

Coil Blaster Solvent


SOLVENT BASED HIGH PRESSURE AEROSOL COIL CLEANER

  • NONFLAMMABLE
  • NON-OILY
  • NONCONDUCTIVE
  • NONCORROSIVE
  • FAST DRYING
  • EASY-FAST-CONVENIENT
  • NO-RESIDUE - NO CLEANUP

COIL BLASTER SOLVENT – Solvent based high-pressure coil cleaner

Item #58520: Each unit contains 18 ounces aerosol solvent coil cleaner. 12 units per case. Case weight = 15 pounds.

DESCRIPTION: COIL BLASTER SOLVENT is a new technology solvent that offers maximum cleaning and degreasing in a convenient ready to use aerosol. The high solvency formula quickly and easily liquefies dirt, grease, oil and other residue and deposits while the blasting nozzle powerfully separates the dirt and debris from the surface. COIL BLASTER SOLVENT can be used on most types of coils and is super-fast evaporating, which requires little or no wiping or post-use clean up. COIL BLASTER SOLVENT is a nonflammable, nonconductive formula and is safe to use on or near live equipment. Contains no ozone depleters.

DIRECTIONS: Always use COIL BLASTER SOLVENT in a well-ventilated area. Place protective paper or cloth absorbent media behind and under area to be cleaned to avoid over spray and to capture deposits being removed. Point special blasting nozzle and spray toward desired surface to be cleaned. Thoroughly saturate the targeted area with COIL BLASTER SOLVENT allowing the high-pressure solvent blast to remove material off surface and onto the absorbent media. Once surface is clean and dry, remove the soiled media. COIL BLASTER SOLVENT may effect certain plastics including those used in newer model drain pans. Do not allow COIL BLASTER SOLVENT to remain in contact with these materials. Wipe immediately with absorbent media such as paper or cloth towels.

SAFETY CONSIDERATIONS: COIL BLASTER SOLVENT contains Trichloroethylene. Vapor harmful. Use with adequate ventilation to keep exposure levels below 25 parts per million OSHA permissible exposure limit (PEL) during an eight hour period (time weighted average). Consult the Material Safety Data Sheet for additional information regarding exposure concerns. Avoid inhalation of spray mist or vapors. If overcome by fumes, remove person to fresh air. Resuscitate if necessary. Get medical attention. Avoid contact with eyes and skin. In case of eye contact, flush immediately with plenty of water and continue for 15 minutes. If discomfort persists, get medical attention. Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120°F. This product contains a chemical or chemicals known to the state of California to cause cancer. Keep out of the reach of children.

CAS NUMBERS: Trichloroethylene 79-01-6; Carbon Dioxide 124-38-9.

USDA Category: C1

Classification: Aerosol Coil Cleaner / General purpose degreaser

General Appearance: Clear

Color: Colorless

Odor: Chlorinated Solvent

pH: n/a

Vapor Pressure @ 70°F: 85-100psig

Spray Pattern: Blasting Stream

Flammability: Not Flammable per CPSC Flame Projection Test

NFPA Code 30B: Level 1